Eibach ERS 9.50 in. Length x 5.00 in. OD Conventional Front Spring

SKU: 0950.500.0800
Current Inventory: Special Order, ships withing 10 to 15 business days.

Eibach produces some of the finest conventional front springs in the world. Other springs may sag or frequently need replaced. Top race teams from F1 to WRC, from Le Mans to NASCAR, inevitably turn to Eibach. They produce springs with unparalleled precision and repeatability, by using the world's finest Hi-Ten spring steel, produced to exceedingly precise tolerances. Eibach uses state-of-the-art technology in every step of the manufacturing process.

Eibach conventional front springs feature:

* Ultra-light weight for reduced unsprung mass
* Maximum deflection in combination with smallest block heights
* Exceptional block resistance and durability
* Precision planparallel and square end configurations under unloaded and loaded conditions
* Lowest side loads with load center ideally located relative to spring axis
* Precision tolerances--the tightest in the industry
* Highest linearity and guaranteed rate consistency
* Each spring individually tested and rated                      

Spring Position: Front

Spring Type: Coil

Spring Rate (lbs/in): 800 lbs./in.

For Street Use: No

Bushings Included: No

Coil Spring Height (in): 9.500 in.

Coil Spring Diameter (in): 5.000 in.

Progressive Rate Spring: No

Front Leaf Spring Bushings Included: No

Spring Finish: Red powdercoated

Quantity: Sold individually.

Notes: Block height: 4.060 inch, load at block height: 4,356 pounds, and travel is 5.440 inch.                              

Write Your Own Review
You're reviewing:Eibach ERS 9.50 in. Length x 5.00 in. OD Conventional Front Spring